Inspection Hardware IntegrationsYour Devices, Directly in Your Reports
Stop copying numbers between apps. InspectForge pulls data from your radon monitors, air quality sensors, and LiDAR scanner straight into your inspection reports — automatically formatted with EPA thresholds and professional context.
3
Hardware Integrations
0
Manual Data Entry
4.0
EPA Action Level (pCi/L)
Auto
Report Addendum Generation
The only inspection software with direct hardware integrations. No competitor connects to Airthings, PurpleAir, or LiDAR — inspectors using InspectForge eliminate manual data entry entirely.
Supported Integrations
Each integration is built to eliminate manual work and add professional credibility to your reports.
Airthings
Radon & Indoor Air Quality
Connect your Airthings radon monitors and pull readings directly into your inspection reports. No more copying numbers from a separate app — radon, CO2, VOCs, temperature, and humidity appear automatically with EPA threshold analysis.
- Radon readings in pCi/L with automatic EPA action level comparison (4.0 pCi/L threshold)
- CO2, VOC, temperature, and humidity data from a single device
- Browse and select from all devices on your Airthings account
- Color-coded pass/monitor/action indicators in your PDF reports
- Professional Environmental Readings addendum auto-generated in reports
- Supports Wave Plus, Wave Radon, View Plus, and other Airthings monitors
Airthings
Radon & Indoor Air Quality
Data Points
Supported Devices
PurpleAir
Outdoor & Indoor Air Quality
Link PurpleAir sensors to properties and document local air quality conditions at the time of inspection. Search for nearby sensors automatically using the property's GPS coordinates, or enter a sensor ID manually.
- PM2.5 and PM10 particulate matter readings with EPA AQI categories
- Automatic nearby sensor discovery based on property location
- Real-time readings pulled directly from PurpleAir's network
- Air quality context included in inspection reports (Good/Moderate/Unhealthy)
- Temperature and humidity data from outdoor sensors
- Useful for documenting environmental conditions during inspections
PurpleAir
Outdoor & Indoor Air Quality
Data Points
Supported Devices
iPhone LiDAR Scanner
3D Measurement & Spatial Analysis
Turn your iPhone Pro into a professional measurement tool. The built-in LiDAR scanner captures precise distances, surface angles, and floor slope measurements — all insertable directly into your inspection report with one tap.
- Tap-to-measure distance between any two surfaces with sub-centimeter accuracy
- Surface angle detection for walls, floors, ceilings, and ramps
- Floor slope analysis with automatic drainage direction and pass/fail compliance
- 3D mesh reconstruction showing all detected surfaces in real-time
- Annotated snapshot capture embeddable directly in inspection reports
- No external hardware needed — uses the LiDAR sensor built into iPhone Pro models
iPhone LiDAR Scanner
3D Measurement & Spatial Analysis
Data Points
Supported Devices
How It Works
Three steps from sensor to professional report — no manual transcription, no copy-paste errors.
Link Your Device
Browse your Airthings account devices, search for nearby PurpleAir sensors, or open the LiDAR scanner on your iPhone Pro. One tap to connect.
Data Flows Automatically
Sensor readings are pulled in real-time. Radon levels, air quality metrics, and spatial measurements appear instantly with professional formatting.
Reports Include Everything
An Environmental Readings addendum is auto-generated in your PDF report with EPA thresholds, color-coded status indicators, and device metadata.
Professional Report Output
When sensors are linked to a property, your PDF report automatically includes a dedicated Environmental Readings addendum.
Radon Section
Radon Level
1.8 pCi/L
Includes EPA context, recommended actions, and device metadata
Air Quality Grid
612 ppm
Normal
142 ppb
Good
72°F
45%
Ideal
Automatically formatted with thresholds and EPA AQI categories
Google Workspace
Beyond hardware, InspectForge connects to the tools you already run your business on. Both are optional and stay switched off until you connect them in your organisation settings.
Google Calendar
Two-way sync for inspection appointments. InspectForge creates, updates and removes the events it manages, and reads your existing events so the booking widget never offers a slot when you are already busy.
Google Drive
Automatic backup of reports, agreements, invoices and inspection photos into an InspectForge Reports folder. InspectForge only ever touches the files it creates there.
How we handle data from these services is set out in our privacy policy.
Coming Soon
We are actively building integrations with more inspection hardware. These are on our roadmap.
FLIR ONE Thermal Camera
In DevelopmentCapture thermal images of electrical panels, HVAC systems, and moisture intrusion. Auto-flag hot spots as deficiencies.
Leica DISTO Laser Measurer
PlannedBluetooth laser distance measurements auto-populate room dimensions and square footage fields.
DJI Drone Integration
PlannedImport geotagged aerial photos from DJI FlightHub 2 into roof inspection reports after drone flights.
Software integrations
Hardware is only half of it. InspectForge also connects to the systems you run the business on — so a closed job becomes a scheduled inspection, and a finished report finds its way back without anyone re-typing an address.
Partner API
A documented REST API with signed webhooks. Create inspections from your CRM, track status, and collect the client report link. The full reference is published — read it before you commit to anything.
Read the API referenceZapier
A Zapier app covering inspection, payment, booking and agreement events, plus actions to create clients, agents and inspections. Currently in private release — ask us for an invite link while it is in review.
Ready to Connect Your Devices?
Start your 14-day free trial and link your Airthings, PurpleAir, or LiDAR scanner to see sensor data flow into your next inspection report.